The revolutionary new Pro Patch Programmable Bantam is a world class modular patching system offering unprecedented flexibility in a convenient, space-saving size and light weight design. The new Pro Patch Programmable Bantam is a WECO standard bantam system in a high-density, 2 x 48, one-rack space panel. The modular design allows individual front jack access for circuit and ground configurations without having to take the entire panel off-line or removing it from the rack. Panels are available in a space saving 1 rack unit, with large 0.411-inch designation strips. Using a unique escutcheon kit, the 1 rack unit can be converted into a 1.5 rack unit with 0.68-inch designation strips. For large multiple panel installations, a new straddle designation strip, designed to straddle two panels, is available - reducing the number of strips used and saving valuable installation labor. The Pro Patch Programmable series is available in several termination options including Edac/Elco 3-pin, 56-pin and 90-pin connectors. At only 5 inches deep, and 6.2 lbs fully configured, the Pro Patch Programmable series is unmatched in the marketplace. Download a complete PDF info sheet here (1372KB) . Pro Patch Programmable Bantam allows individual front-panel jack access for normals and grounds without having to take the entire panel off-line. Special 6 position DIP switches allows configuration of the circuit normal and grounds without cumbersome jumpers or pins to lose.

ADC Pro Patch® Patchbays If a customized patch bay is not an option, these pre-wired patch bays are a great choice. These patch bays use the highest quality frame type jacks with ADC's "crossbar" self-cleaning jacks. All Pro Patch panels are powder coated for exceptional durability and feature an extensive selection of jacks, panel sizes, normal options, and a variety of rear terminations. Pro Patch Mark II Pro Patch Mark II patch bays incorporate individual QCP terminations on the backplane. All Pro Patch Mark II panels include standard horizontal and vertical designation strips. Pro Patch Mark IV Pro Patch Mark IV patch bays feature the new QCP IV punchdown system, drop-down adjustable cable bars, and white backplane, making it easier to see circuits in dark racks. Each Pro Patch panel is loaded with the highest quality frame jacks featuring "crossbar" self-cleaning jacks. ADC Digital Audio Patch Bays ADC's Digital Audio patch bays are designed for patching AES/EBU digital audio signals. The normals strapped or half-normalled panels are used to patch AES digital audio signals up to a total circuit length of 300 feet. Precision 110 Ohm impedance, low capacitance, and shielded twisted pair cable all meet strict AES standards for digital audio transmission lines, to ensure error-free transfer of digital data.

Model	Description	Price/Quantity
PPB3-14MKIINS	96 Point TT 2 space full normalled at jacks, TRS to punchdown	$1318.95 Item: Quantity:
PPB3-14MKIIHN	96 Point TT 2 space half normalled at jacks, TRS to punchdown	$1318.95 Item: Quantity:
PPA1-14MKIINS	48 Point LF 1 space full normalled at jacks, TRS to punchdown	$792.26 Item: Quantity:
PPA1-14MKIINO	48 Point LF 1 space with normals and TRS at punchdown	$947.38 Item: Quantity:
PPA3-14MKIINS	48 Point LF 2 space full normalled at jacks, TRS to punchdown	$792.26 Item: Quantity:
PPA3-14MKIINO	48 Point LF 2 space with normals and TRS at punchdown	$947.38 Item: Quantity:
PPA3-14MKIISN	48 Point LF 2 space with TR and S normals and TRS at punchdown	$1052.65 Item: Quantity:
PPA3-18MKIINO	48 point LF 2 space with normals and TRS at punchdown, 18" deep	$947.38 Item: Quantity:
QB-2	Punch Down Tool	$122.50 Item: Quantity:
QB-2t	Replacement Tip for QB-2 tool	$34.50 Item: Quantity:
Q-115	Low cost punchdown tool, not spring loaded	$44.00 Item: Quantity:

ANALOG AUDIO PATCH BAYS WITH UMBILICAL

Catalog Number BJF 1 2 3 MK 4 5 Match number to chart

PANEL STYLE/HEIGHT

1

1 1 rack space 1.75" (44mm) Longframe jacks

2 2 rack spaces 3.5" (88mm) Longframe jacks

3 1 rack space 1.75" (44mm) Bantam jacks

4 2 rack spaces 3.5" (88mm) Bantam jacks

CIRCUIT CONFIGURATION

2

03 normals brought out to UP panel

07 normals strapped or half normalled at jacks to UP panel

00 normals brought out to stub end

04 normals strapped at jacks to stub end

LENGTH OF UMBILICAL

3

4 4' (1.2m)

* Specify custom length

PANEL SERIES

4

II QCP individual insulators

IV QCP IV 1x8 blocks

CIRCUIT CONFIGURATION

5

26 2x26 array of Longframe jacks

BG bussed grounds

HN half normalled

SN sleeve normals out

ANALOG AUDIO PATCH BAYS WITH PULL-OUT PANEL This space-saving design eliminates the need for rear access. It's perfect for truck and studio installations where rear access isn't possible. The entire bay slides forward, exposing the jacks and bottom-mounted QCP or EDAC terminations.

Catalog Number 1 POP 2 3 4 Match number to chart

JACK TYPE

1

B bantam audio jacks

L longframe audio jacks

PANEL HEIGHT

2

1 1 rack space 1.75" (44mm)

2 2 rack spaces 3.5" (88mm)

TERMINATION TYPE

3

(Leave Blank) QCP punchdown

E EDAC/ELCO 90 pin connectors

CIRCUIT CONFIGURATION

4

HN half normalled

NS normals strapped

NO normals out

SN sleeve normals

NN no normals

DIGITAL AUDIO PATCH BAYS

DIGITAL AUDIO PATCH BAYS

Catalog Number DA 1 2 3 MK 4 5 6 7 Match number to chart

JACK TYPE

1

L longframe audio jacks

B bantam audio jacks

PANEL HEIGHT

2

1 1 rack space 1.75" (44mm)

3 2 rack spaces 3.5" (88mm)

DEPTH

3

14 14" (350mm)

18 18" (450mm)

PANEL SERIES

4

II QCP individual insulators

IV QCP IV 1x8 blocks

CONNECTOR TYPE

5

(Leave Blank) QCP Punchdown

E EDAC/ELCO connector

A AMP connector

CIRCUIT CONFIGURATIONS

6

NS normals strapped

HN half normalled

NO normals out

CUSTOM CONFIGURATIONS

7

26 2x26 array of longframe jacks

BG bussed grounds

DIGITAL AUDIO PATCH BAYS WITH UMBILICAL

Catalog Number DA 1 2 3 MK 4 5 Match number to chart

PANEL STYLE/HEIGHT

1

L1 1 rack space 1.75" (44mm) Longframe jacks

L2 2 rack spaces 3.5" (88mm) Longframe jacks

B3 1 rack space 1.75" (44mm) Bantam jacks

B4 2 rack spaces 3.5" (88mm) Bantam jacks

CIRCUIT CONFIGURATION

2

03 normals brought out to UP panel

07 normals strapped or half normalled at jacks to UP panel

LENGTH OF UMBILICAL

3

4 4' (1.2m)

* Specify custom length

PANEL SERIES

4

II QCP individual insulators

IV QCP IV 1x8 blocks

CIRCUIT CONFIGURATION

5

26 2x26 array of Longframe jacks

BG bussed grounds

HN half normalled

SN sleeve normals out